A-arm input, left - MR2 Turbo

Vehicle Information

Inputs

Track:   35.00 Inches
Outside: 29.000 Inches
Inside:  20.000 Inches
Outside: 31.000 Inches
Inside:  18.000 Inches
Camber:  -1.000 Degrees
Outside: 21.000 Inches
Inside:  19.000 Inches
Outside: 5.000 Inches
Inside:  6.000 Inches

Outputs

Left Side:
 Upper control arm length: 9.22 inches, 234.18 mm; angle: 10.00° below horizontal
 Lower control arm length: 13.04 inches, 331.18 mm; angle: 3.46° above horizontal
Right Side:
 Upper control arm length: 9.22 inches, 234.18 mm; angle: 10.00° below horizontal
 Lower control arm length: 13.04 inches, 331.18 mm; angle: 3.46° above horizontal
Left Side:
Instant center horizontal position: 24.49 inches, 621.94 mm beyond center line
Instant center height: 9.11 inches, 231.50 mm
Right Side:
Instant center horizontal position: 24.49 inches, 621.94 mm beyond center line
Instant center height: 9.11 inches, 231.50 mm
Roll center height: 5.36 inches, 136.21 mm
Left Side:
King pin angle: 5.63°
King pin offset: -14.13 inches, -358.77 mm
Right Side:
King pin angle: 5.63°
King pin offset: -14.13 inches, -358.77 mm
Both sides are symmetrical.